Description
BTT SKR V1.4 TURBO
Features
- BTT SKR V1.4 Turbo with 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1769 main control chip, the performance has been greatly improved.
- Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development.
- Using dedicated power chip M6130, support 12-24V power input.
- Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen.
- Upgrade and configure the firmware through SD card, which is simple, convenient and efficient.
- The SPI and UART working mode driven by the TMC driver, also having the DIAG pin, which eliminates complex wiring process and can be used by simple unplugging jumper cap.
- Support Resume Printing While Power Off, Filament Break Detection, Automatic Shutdown After Printing and so on.
- High performance MOSFET tube, better heat dissipation effect.
- Using removable fuse makes the replacement process easier.
- Reserved extended port SERVOS and Probe to support BL Touch.
- Support RGB light bar.
- Use the power selection design to separate the USB power supply from the switch power supply, effectively avoiding the situation that the USB port of the computer is burnt out due to short circuit.
- The special function interface uses the row needle with conspicuous color,which greatly reduces the error rate of wiring.
- I2C, SPI and WIFI interfaces are reserved for convenience of DIY.
- Closed-loop drive interface is reserved to reduce the trouble of plug-in switching module.
- Double z-axis interface, eliminating the trouble of external drive expansion module.
- The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface.
- More fan interfaces: 1 way CNC fan, 3 way normally open fan.
- Plug-in external DC5V power supply module to supply power to TFT screen, BLtouch and RGB.
Specifications
- Appearance size: 110*85mm
- Mounting size: 102*76mm
- Microprocessor: ARM Cortex-M3 CPU
- Input voltage: DC12V-DC24V 5A-15A
- Logic voltage: DC 3.3V
- WIFI module: ESP-01S
- Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
- Driver working mode support: SPI、UART、STEP/DIR
- Motor driver interface: X. Y. Z. E0. E1. 5 way(Each has a closed loop drive interface) up to 256 subdivisions
- Temperature sensor interface: TH0,.TH1, TB, 3 channel 100K NTC Temperature sensor interface:TH0, TH1, TB, 3 channel 100K NTC (thermal resistance)
- Display: 2.4. 2.8. 3.5 inch TFT（Support dual mode screen）、LCD2004、LCD12864
- PC communication interface: Square USB, easy to plug, communication baud rate of 115200
- Expand the interface function support: Resume Printing While Power Off,Filament Break Detection, Automatic Shutdown After Printing, Automatic leveling, BL Touch
- Support file format: G-code
- Supported machine architecture: XYZ, delta, kossel, Ultimaker, corexy
- Recommended software: Cura、Simplify3D, Pronterface, Repetier-host, Makerware
Refund Policy
Returns
Our policy lasts 7 days. If 7 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 7 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at ecorobotics@ecoprojects.com.na.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at ecorobotics@ecoprojects.com.na and send your item to: Ecoprojects CC, Maxwell Street, Nr 1 Maxwell Park, 10023 Windhoek, Namibia.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, you should mail your product to: Ecoprojects CC, Maxwell Street, Nr 1 Maxwell Park, 10023, Windhoek, Namibia
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping a high-cost item, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Our policy lasts 7 days. If 7 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 7 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at ecorobotics@ecoprojects.com.na.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at ecorobotics@ecoprojects.com.na and send your item to: Ecoprojects CC, Maxwell Street, Nr 1 Maxwell Park, 10023 Windhoek, Namibia.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, you should mail your product to: Ecoprojects CC, Maxwell Street, Nr 1 Maxwell Park, 10023, Windhoek, Namibia
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping a high-cost item, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.