Formfutura Engineering Tough Clear SLA Resin (500ml)
Description
Formfutura Tough Resin is an engineering type of photopolymer resin that is specifically developed to work with all open source SLA, DLP, and LCD 3D Printers in the range of 385 – 405nm. Our Tough Engineering resin is extremely transparent and perfectly balances a high impact strength with semi-flexibility.
Its high level of toughness makes Formfutura Tough Resin ideal for creating strong and functional parts that will be exposed to repeatedly brief periods of intense stress or strain
Key features
- High impact resistance
- Good UV and weather resistance
- Good fatigue resistance
- Extremely transparent with virtually no discoloration and/or yellowing
- High dimensional accuracy and low shrinkage
- Almost odorless processing
- Compatible with all open-source SLA, DLP, and LCD 3D printers in the range of 385 - 405nm
Applications
- Snap-fit assemblies
- Tooling
- Functional prototyping
- Protective cases
- Outdoor parts
- Short-run manufacturing
Resin properties (uncured liquid)
- Viscosity: 1000 cps at 25°C
- Density: 1.12 g/cm2
Mechanical properties
Test method on post cured objects through 10 minutes high power mercury curing.
|
Properties |
Typical Value |
Test Method |
|
Glass transition temperature (Tg) |
32°C |
ASTM D7028 |
|
Water absorption |
0.50% |
ASTM D570-98 |
|
Impact strength (IZOD notched) |
40 J/m |
ASTM D256A |
|
Tensile strength |
45 MPa |
ASTM D638M |
|
Tensile Modulus |
1.4 MPa |
ASTM D638M |
|
Elongation at break |
25% |
ASTM D638M |
|
Flexural Strength |
35 MPa |
ASTM D790M |
|
Flexural Modulus |
900 MPa |
ASTM D2240 |
|
Shore D Hardness |
68 |
ASTM D2240 |
Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature.
Preparation(s) before starting to print
- Shake the bottle for at least 2 minutes before each use.
- After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
-
- The resin can be poured back from the vat into the bottle once your print is finished
- Always use protective measurements like safety glasses and nitrile gloves when handling resins.
Post-processing
- We do advise you to post-process your 3D print in order to achieve the material properties
-
- Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
- An ultrasonic cleaner is preferred/recommended
-
- Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
- Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
-
- Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
- The preferred curing wavelength is between 300-410nm
Safety
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
- Always wear Respiratory Protection when sanding/cutting the resin object.
- Always use nitrile gloves when handling resins and uncured resin objects.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Our policy lasts 7 days. If 7 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 7 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at info@ecoprojects.com.na.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@ecoprojects.com.na and send your item to: Ecoprojects CC, Maxwell Street, Nr 1 Maxwell Park, 10023 Windhoek , Namibia.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, you should mail your product to: Ecoprojects CC, Maxwell Street, Nr 1 Maxwell Park, 10023 Windhoek , Namibia
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.