CREALITY Color Filament System (CFS)

Note: Not directly compatible with K1 printers series conversion kit needed.

The Creality CFS (Color Filament System) is an intelligent multi-material system with 4 spool slots that support multi-color printing and the simultaneous use of different materials. If the device is combined with other Color Filament Systems, a total of 16-colour printing with a wide range of color combinations can be carried out.

The system loads and unloads the filaments automatically - there is no need for time-consuming manual filament changes. In addition, the well-sealed multicolor device with smart temperature and humidity displays can be used as a filament drying box for keeping and storing the filaments.

Automatic RFID recognition of materials is supported.

Tip: The CFS can accommodate four 1 kg spools with a diameter of 197-202 mm and a width of 42-68 mm. Creality filaments with cardboard spools are compatible with the CFS. Filaments such as PLA, PETG, ABS, ASA or PA-CF can be easily processed in the CFS; flexible materials such as TPU or wet filaments such as PVA/BVOH are not supported.

Important note! The device is delivered WITHOUT filament spools. The filaments shown in the photos are only intended to show the multi-material system in a possible working setting.

Specifications

Compatible Filaments:

 PLA / ABS / PETG / ASA / PET / PA-CF / PLA-CF

Note: Not compatible with damp filaments and with TPU95A or other flexible filaments.