Warehouse display
Description
The Major Tech MT723 measures AC and DC current up to 400 A with a 30 mm clamp jaw. It is a practical choice for checking load current without opening the circuit, with additional electrical measurements through test leads.
A backlit display, data hold and built-in flashlight help when working around distribution boards and machinery.
Why you’ll love it
- Measure current by clamp: Check one conductor without inserting the meter in series.
- Cover AC and DC: One instrument supports both current types.
- Keep readings visible: Hold a measurement when the screen is difficult to see.
- Carry fewer tools: Continuity, diode and other meter functions support fault finding.
- Capture motor starting current: A 100 ms inrush function records start-up current.
- Check drive outputs: VFD voltage mode supports 100–600 V AC checks.
- Measure temperature: Use the included Type-K wire probe for contact temperature checks within its rating.
Features
- 4000 count backlit LCD display
- Ø30mm Cable Clamp size
- Measurement of DC voltage and AC voltage up to 1000V
- Capacitance to 100mF
- Temperature measurement from -20⁰C to 1000⁰C
- INRUSH Current Measurements
- VFD – Variable Frequency Drive voltage value
- NCV – Non-Contact Voltage Detector
- Built-In Flashlight
- Continuity buzzer and Diode Test
- Peak Mode and Data Hold function
- Auto Power Off
Technical specifications
Resolution and accuracy depend on the selected range and test conditions. Summary values below are from the manufacturer; refer to the linked user manual for full range-specific limits.
| Function | Range | Resolution | Accuracy |
|---|---|---|---|
| AC True RMS current | 40.00 A | 10 mA | ±(2.0% + 8 digits) |
| AC True RMS current | 400.0 A | 100 mA | ±(2.5% + 8 digits) |
| DC current | 40.00 A | 10 mA | ±(2.0% + 8 digits) |
| DC current | 400.0 A | 100 mA | ±(2.5% + 8 digits) |
| DC voltage | 4.000 V | 1 mV | ±(1.0% + 3 digits) |
| DC voltage | 40.00 V | 10 mV | ±(1.0% + 3 digits) |
| DC voltage | 400.0 V | 100 mV | ±(1.0% + 3 digits) |
| DC voltage | 1,000 V | 1 V | ±(1.2% + 3 digits) |
| AC True RMS voltage | 4.000 V | 1 mV | ±(1.2% + 5 digits) |
| AC True RMS voltage | 40.00 V | 10 mV | ±(1.2% + 5 digits) |
| AC True RMS voltage | 400.0 V | 100 mV | ±(1.2% + 5 digits) |
| AC True RMS voltage | 1,000 V | 1 V | ±(1.5% + 5 digits) |
| Resistance | 400.0 Ω | 0.1 Ω | ±(1.0% + 4 digits) |
| Resistance | 4.000 kΩ | 1 Ω | ±(1.5% + 2 digits) |
| Resistance | 40.00 kΩ | 10 Ω | ±(1.5% + 2 digits) |
| Resistance | 400.0 kΩ | 100 Ω | ±(1.5% + 2 digits) |
| Resistance | 4.000 MΩ | 1 kΩ | ±(2.0% + 5 digits) |
| Resistance | 40.00 MΩ | 10 kΩ | ±(3.0% + 8 digits) |
| Capacitance | Up to 99.99 mF | 0.01 nF finest | Range-dependent; see manual |
| Frequency via voltage leads | 10 Hz–100 kHz | See manual | ±(1.0% + 5 digits) |
| Frequency via clamp | 45 Hz–1 kHz | See manual | ±(1.0% + 5 digits) |
| Temperature, Type-K | −20 to 1,000°C | 0.1 / 1°C | ±(3% of reading + 3°C) |
| Duty cycle | 20.0–80.0% | 0.1% | ±(1.2% + 10 digits) |
| Specification | Value | ||
|---|---|---|---|
| True RMS Measurements | ACV, ACA | ||
| Digital Display | 4000 | ||
| Non-Contact Voltage (NCV) | Yes | ||
| Overrange Indication | Yes | ||
| Continuity | Yes | ||
| Diode Test | Yes | ||
| Jaw Size | 30mm | ||
| Input Impedance | >10MΩ DCV & >10MΩ VAC | ||
| Min Max | Yes | ||
| Peak Hold | Yes | ||
| Data Hold | Yes | ||
| Back Light | Yes | ||
| Enclosure | Double injection moulding | ||
| Low Battery Indication | Yes | ||
| Batteries | 3 x AAA | ||
| Weight | 305g | ||
| Dimensions | 220 x 80 x 39mm | ||
| Safety Specs | IEC61010-1 CAT III 600V | ||
| Inrush capture | 100 ms; maximum 400 A; sensitivity >2 A | ||
| VFD voltage mode | 100–600 V AC | ||
| AC current frequency response | 50–60 Hz | ||
| AC voltage accuracy frequency response | 50–1,000 Hz sine; 50/60 Hz other waveforms | ||
| Measurement rate | 3 readings per second nominal | ||
| Operating temperature | 5–40°C | ||
| Operating altitude | Up to 2,000 m | ||
| Auto power off | Approximately 15 minutes | ||
AC current and AC voltage accuracy applies from 5% to 100% of range. Finest resolution varies with the selected range; full test conditions are in the manual.
Included accessories
- Test Leads
- Type-K Wire Probe
- Type-K Adaptor
- Carrying Case
- 3 x AAA Batteries
- Instruction Manual

