TECHNICAL | HOW TO

HOW TO GET STARTED WITH HOME ASSISTANT (Part 3) - GRAFANA + INFLUX DB

HOW TO GET STARTED WITH HOME ASSISTANT (Part 3) - GRAFANA + INFLUX DB

This blog will guide you through the installation and integration process to allow you to store and visualize your time series sensor data using beautiful Grafana graphs in Home Assistant. Two add-ons will be used for this, Influx DB to store the series data in a time series database. As well as Grafana to link to the Influx DB database and display the required information.

HOW TO INSTALL VICTRON VENUS ON RASPBERRY PI

HOW TO INSTALL VICTRON VENUS ON RASPBERRY PI

If you have experience with Victron solar systems, you know the quality is good, but the monitoring is expensive. This video will guide you step by step through the entire process to allow you to install and configure the Victron Venus operating system on a Raspberry Pi and monitor your solar system on your Victron account, all without the need to buy a Victron controller.

HOW TO ASSEMBLE AN ENDER-3 V2

HOW TO ASSEMBLE AN ENDER-3 V2

This guide helps Ender-3 V2 owners to assemble their machine with minimal difficulties. It covers unboxing, assembly, electrical connections, interface and finally bed levelling. Assembly won’t take longer than an hour under normal circumstances. The only tool needed is a basic knife to open the box. The rest of the tools are included in the box.
HOW TO GET STARTED WITH HOME ASSISTANT (Part 1)

HOW TO GET STARTED WITH HOME ASSISTANT (Part 1)

This blog focuses on using Home Assistant, an open source and FREE home automation operating system, to integrate sensors and operate relays from your smartphone or computer, without writing a lot of complicated code.
GET STARTED WITH RASPBERRY PI AND NODE-RED

GET STARTED WITH RASPBERRY PI AND NODE-RED

So you just received your very first Raspberry Pi, but what can you do with it? Let's have a look your first steps and using Node-RED on your Raspberry Pi.